Aqua Coat Water Based Clear Wood Grain Filler Gel, Great for Home Improvement DIY Woodworking Professionals, Low Odor, Fast Drying and Stainable, 1 Pint

Aqua Coat Water Based Clear Wood Grain Filler Gel, Great for Home Improvement DIY Woodworking Professionals, Low Odor, Fast Drying and Stainable, 1 Pint is ranked 12th in wood filler based on our comprehensive analysis.

Reviewed by more than 136 consumers, more than 65% of the reviews about this Aqua Coat wood filler had positive sentiment, meaning that these customers would probably advise purchasing this product when asked about a recommended wood filler.

Features:

• GREEN ALTERNATIVE to hazardous and flammable solvent finishes and products. Non flammable and non combustible.
• QUICK DRYING FORMULA and easy to level out and sand with minimal shrinkage, making it the best choice for open grained woods like oak and mahogany. Drying time is 30 45 minutes.
• CLEAR FORMULA so it can go over stain and sealers while permitting grain and color to show through.
• YOU CAN ACHIEVE a mirror like, high build finish easily
• DESIGNED WITH EVERYONE IN MIND From the DIYer to the contractor this is the perfect product to fill the grain and seal the pores of wood before or after staining or on raw wood to get a smooth finish on oak, ash, mahogany, walnut and other porous woods. A favorite product for tabletops
• WATERBORNE AND ECO FRIENDLY Our entire line of products are MADE IN THE USA, low VOC, low odor, non flammable, non combustible, water based fast drying, easy to apply, easy sanding, excellent adhesion, water clean up, environmentally friendly. This makes it the healthier option for your employees and your family. Achieve that beautiful glass smooth finish while keeping the environment and your health in mind.
• VERSATILE AND COMPATIBLE WITH OTHER PRODUCTS Filling your wood grain before you stain not only creates that beautiful smooth finish you are looking to achieve it will also seal the pores and help minimize absorption of your top coat, saving you time and money. Aqua Coat Clear Grain Filler can be mixed with water soluble pigments dyes.
• EASY TO USE Work the Clear Grain Filler generously into open wood grain and pores against the grain with a small squeegee, bondo blade, old credit card, or fingers with a glove. Scrape off excess with a squeegee, bondo blade, or an old credit card with the grain Let dry 45 60 minutes. VERY lightly sand with a 320 or higher grit sandpaper or a fine scotchbrite sanding pad immediately before your next application of grain filler. 2 3 coats are recommended.
• LONG LASTING A little goes a long way. You can use one quart to do 2 quarts on a medium sized kitchen 30 40 drawers and doors.
• LONG LASTING A little goes a long way. You can use one quart to do 2 coats on a medium sized kitchen 30 40 drawers and doors, or one pint to use on 5 6 guitars.