FIRSTINFO Patented 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Evacuation w/Extra Storage Tube & Dia is ranked
6th in fluid evacuators
based on our comprehensive analysis.
Reviewed by more than 6 consumers, more than 100% of the reviews about this
FIRSTINFO TOOLS FIT YOUR NEEDS
fluid evacuator had positive sentiment, meaning that these customers would probably advise purchasing this product when asked about a recommended fluid evacuator.
$69.90
(as of
17/06/2023 16:03 PDT
details
)
Features:
-
Multi Use Extract the engine oil, Brake fluid, ATF fluid and other non corrosive fluid of motorcycles and vehicles.
-
Two Way Mode for Oil Change The pneumatic way for quickly oil change. Manual operation without using air compressor easy to do the oil fluid changing.
-
Tubes to Fit Most Vehicles With 4 kinds B.C.D.E nylon tubes can be extracted any non corrosive fluid And use hose B to connect with C,D, or E to extend the hose length to 2M. And E 3.5 x 4.5mm Nylon hose for the new style vehicles.
-
With Safety Design Provided with fixing valve and safety cup for automatically cutting off extracting. And three air outlets with check valve design quick and easy to release the air.
-
Replacing Hose Available The hose can be purchased individually. With the storage hose to collect oil hoses easily.
-
Two Operation Modes for Oil Change The pneumatic way for higher speed of 1.6 1.7L min, extracts engine oil in a 4 cylinder car within 5 minutes. Manual operation requires no other equipment which is easy to do the oil fluid changing for DIY anywhere. No need to to lift up or crawl under the car to change oil.
-
Different sizes of Nylon tubes Extra 3.5x4.5mm Thinnest One With 4 diameters of tubes which can go into the bottom of oil pan. Nylon oil hoses B 7.8x9.8mm X 1M C 5.3x6.7mm X 1M D 4x6mm X 1M E 3.5x4.5mm X1M. B hose can be connected to C
-
No Limits, Work Freely Widely Extract the engine oil, Brake fluid, ATF fluid and other non corrosive and non thick fluid of motorcycles and vehicles. Note Gasoline, and fluid with high volatility, high corrosion, high alkalinity or acidity high temperature are FORBIDDEN to be used with this extractor. No limits to any places and no need to lift up or crawl under the car to change oil fluid..
-
Replacing Hose Available Hose Storage w Dust Cover Design With the storage hose to collect oil hoses easily after using, and duster cover to avoid any dust and dirt. The hose can be purchased individually.
-
Replacing Hose Available Hose Storage w Sealing Cap With the storage hose to collect oil hoses easily after using, and sealing cap to avoid any dust and dirt, and also can prevent the liquid from spillage during transport. The hoses can be purchased individually.
-
Dual Mode The pneumatic mode for higher speed of oil change just need to connect with air compressor. Manual mode requires no other equipment easy to do the oil fluid changing for DIY. No need to lift up or crawl under the car to drain out the oil.
-
Speedy Extraction Fast suction and extraction speed of 1.6 1.8L min. Extracts engine oil in a 4 cylinder car within few minutes in pneumatic mode. And leaves no mess to clean afterward.
-
No Oil Left With 4 sizes of tubes which can go into the bottom of oil pan. Nylon oil hoses B 7.8x9.8mm X 1M C 5.3x6.7mm X 1M D 4x6mm X 1M E 3.5x4.5mm X1M B hose can be connected to C,D or E hose and it will extend to 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
-
No Limit No limit to any places perfect for working on vehicles anytime and anywhere, and for aquarium. To extract the engine oil, brake fluid, ATF fluid and other fluid of motorcycles, vehicles, lawn mower, boat, jet ski etc.
-
Humanization Design Equipped with the storage unit to collect oil tubes without mess after using without any assembling work. The sealing cap to avoid any dust or dirt and prevent the liquid from spillage during transport. The tubes can be purchased individually.
-
Dual Mode Pneumatic and manual mode to fit your needs. The pneumatic mode makes the pump a higher speed oil changer, while the manual mode requires no other equipment to use. With FIRSTINFO oil extractor pump, no need to lift or crawl under the car to drain out the oil anymore.
-
Speedy Extraction Comes with 3 sizes of extra long tubes with different diameters, which can reach the very bottom of your reservoir. Fast suction speed of 1.8L min Extracts engine oil in a 4 cylinder car within few minutes in pneumatic mode
-
No Limit No Leak No limit to any places, ideal for working on vehicles anytime and anywhere, and for aquarium. Perfectly extracts the engine oil, brake fluid, transmission fluid, coolant, and power steering fluid. Applicable for motorcycles
-
Original Patent Design Please identify FIRSTINFO oil fluid extractor that has the patent authentication. US Patent Number 8360741 We provide you quality assurance tools with 12 10 months after sales warranty 10 months warranty by register support. Help you to achieve the satisfactory shopping experience.
-
Convenient Tubes Storage Come with a no assembly required storage set to store oil tubes easily after operating, keeping the work area clean and tidy.
-
No Limit The manual pump allows you to do fluid changing without equipment limitations. No Compressor, No Jack, No Crawler!
-
No Oil Left Come with an Extra 3.5 x 4.5mm Thinnest Tube to extract oil through the dipstick funnel and reach the bottom of the oil pan to suck up the last drop of fluid.
-
Replacing Tubes Available The sealing cap to avoid any dust or dirt and prevent the liquid from spillage during transport. All the tubes can be purchased individually in FIRSTINFO store.
-
No Limit The manual pump allows you to do fluid changing without equipment limitations. No Compressor, No Jack, No Crawler! Note Gasoline, diesel fuel, and fluid with high viscosity, volatility, high corrosion, high alkalinity or acidity high temperature are FORBIDDEN to be used with this extractor.